PHC on Debian ... giving up :-/

If you have trouble with PHC you can ask and hope for help here.
cocoonair
Posts: 7
Joined: Fri 4. May 2012, 22:15

PHC on Debian ... giving up :-/

Post by cocoonair » Fri 4. May 2012, 22:47

Hey Fokes.

First of all thanks for your help! ;) I really hope getting some support here after trying to install phc for at least 7 hours or so :roll: - and sadly without success...

System:
Old Fujitsu Siemens with Intel Centrino 1,6 Ghz (Dualboot Win XP and Debian stable, Kernel: 2.6.32-5-686)
In Windows I can throttle down to 600 Mhz AND 0.7 Volt - stable - would like to do the same on Debian. However up to now I am only able to reduce the GHz via the CPU Frequency Scaling Monitor. So...

I followed this HOWTO as well as [url=hthttp://www.linux-phc.org/forum/viewtopic.php?f=8&t=8/url]THIS ONE[/url].

"make prepare" - works
"make" - works
"phc-intel.ko" was created
Moved acpi-cpufreq and replaced with phc-intel.ko
I even get the files (sys/devices/system/cpu/cpu0/cpufrq) phc_vids, phc_controls, ...

However I can't open or access them??
I think I somehow can't disable the current acpi-cpufreq (however it doesn't even show up with lsmod?)

lsmod:

Code: Select all

[size=50]root@NCC:/home/cocoonair# lsmod
Module                  Size  Used by
cpufreq_stats           1997  0 
cpufreq_userspace       1444  0 
cpufreq_powersave        602  1 
cpufreq_conservative     4018  0 
parport_pc             15799  0 
ppdev                   4058  0 
lp                      5570  0 
parport                22554  3 parport_pc,ppdev,lp
sco                     5885  2 
bridge                 32895  0 
stp                      996  1 bridge
bnep                    7384  2 
rfcomm                 25131  0 
l2cap                  21721  6 bnep,rfcomm
crc16                   1027  1 l2cap
bluetooth              36251  6 sco,bnep,rfcomm,l2cap
rfkill                 10196  3 bluetooth
binfmt_misc             4875  1 
uinput                  4796  1 
fuse                   44064  1 
loop                    9733  0 
firewire_sbp2           9579  0 
phc_intel               8819  0 
pcmcia                 16194  0 
yenta_socket           16403  1 
radeon                511472  2 
rsrc_nonstatic          7057  1 yenta_socket
ttm                    33266  1 radeon
ipw2200               108264  0 
drm_kms_helper         18533  1 radeon
snd_intel8x0m           8100  0 
pcmcia_core            20414  3 pcmcia,yenta_socket,rsrc_nonstatic
libipw                 18403  1 ipw2200
drm                   111849  4 radeon,ttm,drm_kms_helper
i2c_algo_bit            3493  1 radeon
snd_intel8x0           19595  0 
lib80211                2834  2 ipw2200,libipw
snd_ac97_codec         79200  2 snd_intel8x0m,snd_intel8x0
ac97_bus                 710  1 snd_ac97_codec
snd_pcm                47226  3 snd_intel8x0m,snd_intel8x0,snd_ac97_codec
i2c_i801                6462  0 
joydev                  6739  0 
shpchp                 21200  0 
snd_seq                35327  0 
pci_hotplug            18545  1 shpchp
snd_timer              12270  2 snd_pcm,snd_seq
snd_seq_device          3673  1 snd_seq
rng_core                2178  0 
i2c_core               12751  5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
processor              26259  2 phc_intel
snd                    34387  7 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
pcspkr                  1207  0 
video                  14605  0 
output                  1204  1 video
soundcore               3450  1 snd
snd_page_alloc          4977  3 snd_intel8x0m,snd_intel8x0,snd_pcm
ac                      1640  0 
evdev                   5609  12 
battery                 3782  0 
psmouse                44777  0 
button                  3598  0 
serio_raw               2916  0 
ext3                   94020  1 
jbd                    32197  1 ext3
mbcache                 3762  1 ext3
usbhid                 27880  0 
hid                    50841  1 usbhid
sg                     19905  0 
sr_mod                 10770  0 
cdrom                  26435  1 sr_mod
sd_mod                 25945  3 
crc_t10dif              1012  1 sd_mod
8139too                14849  0 
ata_generic             2247  0 
uhci_hcd               15989  0 
cb710_mmc               4729  0 
mmc_core               38277  1 cb710_mmc
ata_piix               17704  2 
thermal                 9206  0 
8139cp                 13285  0 
firewire_ohci          16693  0 
libata                115649  2 ata_generic,ata_piix
ehci_hcd               28449  0 
mii                     2714  2 8139too,8139cp
thermal_sys             9378  3 processor,video,thermal
cb710                   3304  1 cb710_mmc
firewire_core          31107  2 firewire_sbp2,firewire_ohci
crc_itu_t               1035  1 firewire_core
scsi_mod              104765  5 firewire_sbp2,sg,sr_mod,sd_mod,libata
usbcore                99125  4 usbhid,uhci_hcd,ehci_hcd
nls_base                4541  1 usbcore[/size]
I hope my post isn't too confusing but I am already a little dizzy after all this :mrgreen:

Thanks for any help!

P.S: I just started with Linux some time ago - Very simple answers are thus highly appreciated :P

lio
Posts: 91
Joined: Wed 2. Mar 2011, 18:37

Re: PHC on Debian ... giving up :-/

Post by lio » Sat 5. May 2012, 08:38

Hi,

Which phc-package did you use?
cocoonair wrote:"make prepare" - works
"make" - works
"phc-intel.ko" was created
The next step would be "make install" so you don't need to manually do
Moved acpi-cpufreq and replaced with phc-intel.ko
But as those files:
I even get the files (sys/devices/system/cpu/cpu0/cpufrq) phc_vids, phc_controls, ...
are existent, everything seems to be in line.
However I can't open or access them??
Execute this:

Code: Select all

cat /sys/devices/system/cpu/cpu*/cpufreq/phc_controls
and that

Code: Select all

 ls -l /sys/devices/system/cpu/cpu*/cpufreq/phc_*
and post the output
I think I somehow can't disable the current acpi-cpufreq (however it doesn't even show up with lsmod?)
No, you have the phc_intel module loaded instead of the acpi-cpufreq module. It shows up in lsmod and their would not be any phc_* file in /sys/* if this had failed.

cocoonair
Posts: 7
Joined: Fri 4. May 2012, 22:15

Re: PHC on Debian ... giving up :-/

Post by cocoonair » Sat 5. May 2012, 13:29

Hi lio - Thanks for your help!!!!
Which phc-package did you use
I used phc-intel-0.3.2-10 (and den the patch file from the 2.6.32 folder)
The next step would be "make install" so you don't need to manually do
mhm... I only used make and everything ran through by itself... but I guess that was sufficient as the files were created?

Code: Select all

cat /sys/devices/system/cpu/cpu*/cpufreq/phc_controls

Code: Select all

ls -l /sys/devices/system/cpu/cpu*/cpufreq/phc_*
Got this:

Code: Select all

root@NCC:/home/cocoonair# cat /sys/devices/system/cpu/cpu*/cpufreq/phc_control
cat: /sys/devices/system/cpu/cpu*/cpufreq/phc_control: No such file or directory
root@NCC:/home/cocoonair# cat /sys/devices/system/cpu/cpu0/cpufreq/phc_control
cat: /sys/devices/system/cpu/cpu0/cpufreq/phc_control: No such file or directory
root@NCC:/home/cocoonair# ls -l /sys/devices/system/cpu/cpu*/cpufreq/phc_*
-rw-r--r-- 1 root root 4096 May  5 12:20 /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
-r--r--r-- 1 root root 4096 May  5 12:20 /sys/devices/system/cpu/cpu0/cpufreq/phc_default_controls
-r--r--r-- 1 root root 4096 May  5 12:20 /sys/devices/system/cpu/cpu0/cpufreq/phc_default_vids
-r--r--r-- 1 root root 4096 May  5 12:20 /sys/devices/system/cpu/cpu0/cpufreq/phc_fids
-r--r--r-- 1 root root 4096 May  5 12:20 /sys/devices/system/cpu/cpu0/cpufreq/phc_version
-rw-r--r-- 1 root root 4096 May  5 12:20 /sys/devices/system/cpu/cpu0/cpufreq/phc_vids
Maybe I also messed up everything because I had several different approaches using different HOWTO's :oops: ??
:P

lio
Posts: 91
Joined: Wed 2. Mar 2011, 18:37

Re: PHC on Debian ... giving up :-/

Post by lio » Sat 5. May 2012, 14:47

Compare this:
Execute this:

Code: Select all

cat /sys/devices/system/cpu/cpu*/cpufreq/phc_controls
to that
Got this:

Code: Select all

root@NCC:/home/cocoonair# cat /sys/devices/system/cpu/cpu*/cpufreq/phc_control
You see the difference? ;-) Besides that, everything seems reasonable. You only need to find out which values to tweak:

Code: Select all

cat /sys/devices/system/cpu/cpu0/cpufreq/phc_default_vids
You need to lower them careful to your needs or just before the cpu hangs - whichever happens first. Now for an example: Take a cpu with three different frequency steps and therefore

Code: Select all

cat /sys/devices/system/cpu/cpu0/cpufreq/phc_default_vids
gives something like "44 29 19" as output (just an example, your values will differ), where 44 represents a voltage id used with the highest frequency, 29 is used for the middle frequency and 19 for the lowest frequency. If this cpu would have 6 different frequency steps, there would be 6 values instead of 3. Now to change those settings, one needs only to feed new values like

Code: Select all

echo 43 29 19 > /sys/devices/system/cpu/cpu0/cpufreq/phc_vids
and repeat it for every cpu core. In this example, only the voltage when running with highest frequency was changed a little bit.

With this example in mind, you can try to find the best(minimal) settings where your cpu doesn't crash, hang or freezes to death.

cocoonair
Posts: 7
Joined: Fri 4. May 2012, 22:15

Re: PHC on Debian ... giving up :-/

Post by cocoonair » Sat 5. May 2012, 23:57

You see the difference? ;-) Besides that, everything seems reasonable. You only need to find out which values to tweak:
OMG - I am terrible sorry but I don't get the difference! :oops:
I mean except the whole bash (do you call it like that?) in front. cd to root doesn't help either and I cann't get rid of "root@NCC:" in the Terminal... ??
Please don't kill me - I do seam a little awkward but I guess sometimes the solutions are to simple :?
Besides that, everything seems reasonable
That's good news. Then PHCtool would be next... yeah I used Windows before :oops:

Thanks for your help and sorry for the late post - it is a little busy during the weekend...

lio
Posts: 91
Joined: Wed 2. Mar 2011, 18:37

Re: PHC on Debian ... giving up :-/

Post by lio » Sun 6. May 2012, 08:59

cocoonair wrote:I mean except the whole bash (do you call it like that?) in front.
The whole shell can be a bash or something else and shows you a command prompt. The stuff in front of the cursor is just informational.
cd to root doesn't help either and I cann't get rid of "root@NCC:" in the Terminal... ??
You don't need to cd anywhere, because the command I provided you with used an absolute path - The point I tried to make was really simple. You had a typo in your command. If you have another look at it, you will see a missing s at the end of the command you entered - phc_controls vs. phc_control.
Please don't kill me - I do seam a little awkward but I guess sometimes the solutions are to simple :?
Too late for apologies. A death squad of highly skilled killer monkeys is just right on the way to you.

cocoonair
Posts: 7
Joined: Fri 4. May 2012, 22:15

Re: PHC on Debian ... giving up :-/

Post by cocoonair » Sun 6. May 2012, 19:07

Too late for apologies. A death squad of highly skilled killer monkeys is just right on the way to you.
OMG - and I wouldn't even blame you!!! :D
you will see a missing s at the end of the command
Well it's really unbelievable I didn't see it. But I guess I was just too confused to see the obvious... :P

Dear lio, thank you very, very much for your help. I will post how I succeed in the next few days :)

EDIT:

Ok. bad news. I just checked the cat command again and also including the mysterious lost "S" ;) - phc_controls - Sadly I got the "no such device" output again.
Dam I was really hoping this was solved. Do you have any new ideas?? (the spelling should be ok now - I double checked also with my directory :))
I also noticed that the are "phc_default_controls" files as well as the "phc_controls" and so on. Might that lead to something?

cocoonair
Posts: 7
Joined: Fri 4. May 2012, 22:15

Re: PHC on Debian ... giving up :-/

Post by cocoonair » Tue 8. May 2012, 18:40

Code: Select all

root@NCC:/home/cocoonair# cat /sys/devices/system/cpu/cpu*/cpufreq/phc_controls
cat: /sys/devices/system/cpu/cpu*/cpufreq/phc_controls: No such file or directory
Any new advises? The files (via nautilus) are there but I can't access them with cat??

User avatar
DavidG
Posts: 180
Joined: Fri 18. Jul 2008, 11:25
Contact:

Re: PHC on Debian ... giving up :-/

Post by DavidG » Tue 8. May 2012, 20:52

cocoonair wrote:

Code: Select all

root@NCC:/home/cocoonair# cat /sys/devices/system/cpu/cpu*/cpufreq/phc_controls
cat: /sys/devices/system/cpu/cpu*/cpufreq/phc_controls: No such file or directory
Any new advises? The files (via nautilus) are there but I can't access them with cat??
Perhaps this works instead?

Code: Select all

cat /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
Not every shell expands the "*" to all applicable paths (like ksh99 and csh).

Please also post the output of:

Code: Select all

cat /proc/cpuinfo
A bank is a place where they lend you an umbrella in fair weather and ask for it back when it begins to rain -- R. Frost

cocoonair
Posts: 7
Joined: Fri 4. May 2012, 22:15

Re: PHC on Debian ... giving up :-/

Post by cocoonair » Tue 8. May 2012, 21:48

Hi DavidG.

Thanks for your help. Here are my outputs:

Code: Select all

root@NCC:~# cat /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
cat: /sys/devices/system/cpu/cpu0/cpufreq/phc_controls: No such device
root@NCC:~# cat /proc/cpuinfo
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 13
model name	: Intel(R) Pentium(R) M processor 1.50GHz
stepping	: 6
cpu MHz		: 600.000
cache size	: 2048 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe up bts est tm2
bogomips	: 1197.19
clflush size	: 64
cache_alignment	: 64
address sizes	: 32 bits physical, 32 bits virtual
power management:

root@NCC:~# lsmod
Module                  Size  Used by
cpufreq_stats           1997  0 
cpufreq_userspace       1444  0 
cpufreq_powersave        602  1 
cpufreq_conservative     4018  0 
parport_pc             15799  0 
ppdev                   4058  0 
lp                      5570  0 
parport                22554  3 parport_pc,ppdev,lp
sco                     5885  2 
bridge                 32895  0 
stp                      996  1 bridge
bnep                    7384  2 
rfcomm                 25131  0 
l2cap                  21721  4 bnep,rfcomm
crc16                   1027  1 l2cap
bluetooth              36251  6 sco,bnep,rfcomm,l2cap
rfkill                 10196  3 bluetooth
binfmt_misc             4875  1 
uinput                  4796  1 
fuse                   44064  1 
loop                    9733  0 
firewire_sbp2           9579  0 
phc_intel               8819  0 
snd_intel8x0m           8100  0 
snd_intel8x0           19595  0 
snd_ac97_codec         79200  2 snd_intel8x0m,snd_intel8x0
ac97_bus                 710  1 snd_ac97_codec
snd_pcm                47226  3 snd_intel8x0m,snd_intel8x0,snd_ac97_codec
snd_seq                35327  0 
snd_timer              12270  2 snd_pcm,snd_seq
radeon                511472  2 
snd_seq_device          3673  1 snd_seq
ttm                    33266  1 radeon
ipw2200               108264  0 
drm_kms_helper         18533  1 radeon
snd                    34387  7 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
pcmcia                 16194  0 
libipw                 18403  1 ipw2200
soundcore               3450  1 snd
drm                   111849  4 radeon,ttm,drm_kms_helper
i2c_algo_bit            3493  1 radeon
joydev                  6739  0 
yenta_socket           16403  1 
rsrc_nonstatic          7057  1 yenta_socket
i2c_i801                6462  0 
snd_page_alloc          4977  3 snd_intel8x0m,snd_intel8x0,snd_pcm
lib80211                2834  2 ipw2200,libipw
i2c_core               12751  5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
pcmcia_core            20414  3 pcmcia,yenta_socket,rsrc_nonstatic
rng_core                2178  0 
shpchp                 21200  0 
pcspkr                  1207  0 
psmouse                44777  0 
processor              26259  2 phc_intel
pci_hotplug            18545  1 shpchp
evdev                   5609  12 
ac                      1640  0 
battery                 3782  0 
video                  14605  0 
output                  1204  1 video
button                  3598  0 
serio_raw               2916  0 
ext3                   94020  1 
jbd                    32197  1 ext3
mbcache                 3762  1 ext3
usbhid                 27880  0 
hid                    50841  1 usbhid
sg                     19905  0 
sr_mod                 10770  0 
cdrom                  26435  1 sr_mod
sd_mod                 25945  3 
crc_t10dif              1012  1 sd_mod
ata_generic             2247  0 
uhci_hcd               15989  0 
cb710_mmc               4729  0 
mmc_core               38277  1 cb710_mmc
ata_piix               17704  2 
8139too                14849  0 
thermal                 9206  0 
firewire_ohci          16693  0 
libata                115649  2 ata_generic,ata_piix
8139cp                 13285  0 
ehci_hcd               28449  0 
cb710                   3304  1 cb710_mmc
thermal_sys             9378  3 processor,video,thermal
firewire_core          31107  2 firewire_sbp2,firewire_ohci
crc_itu_t               1035  1 firewire_core
mii                     2714  2 8139too,8139cp
scsi_mod              104765  5 firewire_sbp2,sg,sr_mod,sd_mod,libata
usbcore                99125  4 usbhid,uhci_hcd,ehci_hcd
nls_base                4541  1 usbcore
root@NCC:~# 
This is really weird. I just put in the command again and voila: ???

Code: Select all

cocoonair@NCC:~$ su
Password: 
root@NCC:/home/cocoonair# cd
root@NCC:~# root@NCC:~# cat /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
bash: root@NCC:~#: command not found
root@NCC:~# cat: /sys/devices/system/cpu/cpu0/cpufreq/phc_controls: No such device
 
bash: cat:: command not found
root@NCC:~# root@NCC:~# cat /proc/cpuinfo
bash: root@NCC:~#: command not found
root@NCC:~# processor: 0
bash: processor:: command not found
root@NCC:~# vendor_id: GenuineIntel
bash: vendor_id:: command not found
t
root@NCC:~# cpu family: 6
bash: cpu: command not found
root@NCC:~# model: 13
bash: model:: command not found
root@NCC:~# model name: Intel(R) Pentium(R) M processor 1.50GHz
bash: syntax error near unexpected token `('
root@NCC:~# stepping: 6
bash: stepping:: command not found
root@NCC:~# cpu MHz: 600.000
bash: cpu: command not found
root@NCC:~# cache size: 2048 KB
bash: cache: command not found
root@NCC:~# fdiv_bug: no
bash: fdiv_bug:: command not found
root@NCC:~# hlt_bug: no
bash: hlt_bug:: command not found
root@NCC:~# f00f_bug: no
bash: f00f_bug:: command not found
root@NCC:~# coma_bug: no
bash: coma_bug:: command not found
root@NCC:~# fpu: yes
bash: fpu:: command not found
root@NCC:~# fpu_exception: yes
bash: fpu_exception:: command not found
root@NCC:~# cpuid level: 2
bash: cpuid: command not found
root@NCC:~# wpa_: yes
bash: wpa_:: command not found
root@NCC:~# flags: fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe up bts est tm2
bash: flags:: command not found
root@NCC:~# bogomips: 1197.19
bash: bogomips:: command not found
root@NCC:~# clflush size: 64
bash: clflush: command not found
root@NCC:~# cache_alignment: 64
bash: cache_alignment:: command not found
root@NCC:~# address sizes: 32 bits physical, 32 bits virtual
bash: address: command not found
root@NCC:~# power management:
bash: power: command not found
root@NCC:~# 
root@NCC:~# root@NCC:~# lsmod
bash: root@NCC:~#: command not found
root@NCC:~# Module                  Size  Used by
bash: Module: command not found
root@NCC:~# cpufreq_stats           1997  0 
bash: cpufreq_stats: command not found
root@NCC:~# cpufreq_userspace       1444  0 
bash: cpufreq_userspace: command not found
root@NCC:~# cpufreq_powersave        602  1 
bash: cpufreq_powersave: command not found
root@NCC:~# cpufreq_conservative     4018  0 
bash: cpufreq_conservative: command not found
root@NCC:~# parport_pc             15799  0 
bash: parport_pc: command not found
root@NCC:~# ppdev                   4058  0 
bash: ppdev: command not found
root@NCC:~# lp                      5570  0 
lp: Error - unable to access "5570" - No such file or directory
root@NCC:~# parport                22554  3 parport_pc,ppdev,lp
bash: parport: command not found
root@NCC:~# sco                     5885  2 
bash: sco: command not found
root@NCC:~# bridge                 32895  0 
bash: bridge: command not found
root@NCC:~# stp                      996  1 bridge
bash: stp: command not found
root@NCC:~# bnep                    7384  2 
bash: bnep: command not found
root@NCC:~# rfcomm                 25131  0 
RFCOMM configuration utility ver 4.66
Usage:
	rfcomm [options] <command> <dev>

Options:
	-i [hciX|bdaddr]      Local HCI device or BD Address
	-h, --help            Display help
	-r, --raw             Switch TTY into raw mode
	-A, --auth            Enable authentication
	-E, --encrypt         Enable encryption
	-S, --secure          Secure connection
	-M, --master          Become the master of a piconet
	-f, --config [file]   Specify alternate config file
	-a                    Show all devices (default)

Commands:
	bind     <dev> <bdaddr> [channel]	Bind device
	release  <dev>                   	Release device
	show     <dev>                   	Show device
	connect  <dev> <bdaddr> [channel]	Connect device
	listen   <dev> [channel [cmd]]   	Listen
	watch    <dev> [channel [cmd]]   	Watch

root@NCC:~# l2cap                  21721  4 bnep,rfcomm
bash: l2cap: command not found
root@NCC:~# crc16                   1027  1 l2cap
bash: crc16: command not found
root@NCC:~# bluetooth              36251  6 sco,bnep,rfcomm,l2cap
bash: bluetooth: command not found
root@NCC:~# rfkill                 10196  3 bluetooth
bash: rfkill: command not found
root@NCC:~# binfmt_misc             4875  1 
bash: binfmt_misc: command not found
root@NCC:~# uinput                  4796  1 
bash: uinput: command not found
root@NCC:~# fuse                   44064  1 
bash: fuse: command not found
root@NCC:~# loop                    9733  0 
bash: loop: command not found
root@NCC:~# firewire_sbp2           9579  0 
bash: firewire_sbp2: command not found
root@NCC:~# phc_intel               8819  0 
bash: phc_intel: command not found
root@NCC:~# snd_intel8x0m           8100  0 
bash: snd_intel8x0m: command not found
root@NCC:~# snd_intel8x0           19595  0 
bash: snd_intel8x0: command not found
root@NCC:~# snd_ac97_codec         79200  2 snd_intel8x0m,snd_intel8x0
bash: snd_ac97_codec: command not found
root@NCC:~# ac97_bus                 710  1 snd_ac97_codec
bash: ac97_bus: command not found
root@NCC:~# snd_pcm                47226  3 snd_intel8x0m,snd_intel8x0,snd_ac97_codec
bash: snd_pcm: command not found
root@NCC:~# snd_seq                35327  0 
bash: snd_seq: command not found
root@NCC:~# snd_timer              12270  2 snd_pcm,snd_seq
bash: snd_timer: command not found
root@NCC:~# radeon                511472  2 
bash: radeon: command not found
root@NCC:~# snd_seq_device          3673  1 snd_seq
bash: snd_seq_device: command not found
root@NCC:~# ttm                    33266  1 radeon
bash: ttm: command not found
root@NCC:~# ipw2200               108264  0 
bash: ipw2200: command not found
root@NCC:~# drm_kms_helper         18533  1 radeon
bash: drm_kms_helper: command not found
root@NCC:~# snd                    34387  7 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
bash: snd: command not found
root@NCC:~# pcmcia                 16194  0 
bash: pcmcia: command not found
root@NCC:~# libipw                 18403  1 ipw2200
bash: libipw: command not found
root@NCC:~# soundcore               3450  1 snd
bash: soundcore: command not found
root@NCC:~# drm                   111849  4 radeon,ttm,drm_kms_helper
bash: drm: command not found
root@NCC:~# i2c_algo_bit            3493  1 radeon
bash: i2c_algo_bit: command not found
root@NCC:~# joydev                  6739  0 
bash: joydev: command not found
root@NCC:~# yenta_socket           16403  1 
bash: yenta_socket: command not found
root@NCC:~# rsrc_nonstatic          7057  1 yenta_socket
bash: rsrc_nonstatic: command not found
root@NCC:~# i2c_i801                6462  0 
bash: i2c_i801: command not found
root@NCC:~# snd_page_alloc          4977  3 snd_intel8x0m,snd_intel8x0,snd_pcm
bash: snd_page_alloc: command not found
root@NCC:~# lib80211                2834  2 ipw2200,libipw
bash: lib80211: command not found
root@NCC:~# i2c_core               12751  5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
bash: i2c_core: command not found
root@NCC:~# pcmcia_core            20414  3 pcmcia,yenta_socket,rsrc_nonstatic
bash: pcmcia_core: command not found
root@NCC:~# rng_core                2178  0 
bash: rng_core: command not found
root@NCC:~# shpchp                 21200  0 
bash: shpchp: command not found
root@NCC:~# pcspkr                  1207  0 
bash: pcspkr: command not found
root@NCC:~# psmouse                44777  0 
bash: psmouse: command not found
root@NCC:~# processor              26259  2 phc_intel
bash: processor: command not found
root@NCC:~# pci_hotplug            18545  1 shpchp
bash: pci_hotplug: command not found
root@NCC:~# evdev                   5609  12 
bash: evdev: command not found
root@NCC:~# ac                      1640  0 
bash: ac: command not found
root@NCC:~# battery                 3782  0 
bash: battery: command not found
root@NCC:~# video                  14605  0 
bash: video: command not found
root@NCC:~# output                  1204  1 video
bash: output: command not found
root@NCC:~# button                  3598  0 
bash: button: command not found
root@NCC:~# serio_raw               2916  0 
bash: serio_raw: command not found
root@NCC:~# ext3                   94020  1 
bash: ext3: command not found
root@NCC:~# jbd                    32197  1 ext3
bash: jbd: command not found
root@NCC:~# mbcache                 3762  1 ext3
bash: mbcache: command not found
root@NCC:~# usbhid                 27880  0 
bash: usbhid: command not found
root@NCC:~# hid                    50841  1 usbhid
bash: hid: command not found
root@NCC:~# sg                     19905  0 
sg: group '19905' does not exist
root@NCC:~# sr_mod                 10770  0 
bash: sr_mod: command not found
root@NCC:~# cdrom                  26435  1 sr_mod
bash: cdrom: command not found
root@NCC:~# sd_mod                 25945  3 
bash: sd_mod: command not found
root@NCC:~# crc_t10dif              1012  1 sd_mod
bash: crc_t10dif: command not found
root@NCC:~# ata_generic             2247  0 
bash: ata_generic: command not found
root@NCC:~# uhci_hcd               15989  0 
bash: uhci_hcd: command not found
root@NCC:~# cb710_mmc               4729  0 
bash: cb710_mmc: command not found
root@NCC:~# mmc_core               38277  1 cb710_mmc
bash: mmc_core: command not found
root@NCC:~# ata_piix               17704  2 
bash: ata_piix: command not found
root@NCC:~# 8139too                14849  0 
bash: 8139too: command not found
root@NCC:~# thermal                 9206  0 
bash: thermal: command not found
root@NCC:~# firewire_ohci          16693  0 
bash: firewire_ohci: command not found
root@NCC:~# libata                115649  2 ata_generic,ata_piix
bash: libata: command not found
root@NCC:~# 8139cp                 13285  0 
bash: 8139cp: command not found
root@NCC:~# ehci_hcd               28449  0 
bash: ehci_hcd: command not found
root@NCC:~# cb710                   3304  1 cb710_mmc
bash: cb710: command not found
root@NCC:~# thermal_sys             9378  3 processor,video,thermal
bash: thermal_sys: command not found
root@NCC:~# firewire_core          31107  2 firewire_sbp2,firewire_ohci
bash: firewire_core: command not found
root@NCC:~# crc_itu_t               1035  1 firewire_core
bash: crc_itu_t: command not found
root@NCC:~# mii  
bash: mii: command not found
root@NCC:~# scsi_mod              104765  5 firewire_sbp2,sg,sr_mod,sd_mod,libat
bash: scsi_mod: command not found
root@NCC:~# usbcore                99125  4 usbhid,uhci_hcd,ehci_hcd
bash: usbcore: command not found
root@NCC:~# nls_base                4541  1 usbcore
bash: nls_base: command not found
root@NCC:~# root@NCC:~# 
bash: root@NCC:~#: command not found


I have no idea what is going on :lol: :lol:

Post Reply